Table 2 Description of the values obtained for the different iterations 
. The term 
corresponds to the accuracy constraint for the fixed-point conversion. The term 
is the measured performance obtained after the fixed-point conversion.
. The term 
corresponds to the accuracy constraint for the fixed-point conversion. The term 
is the measured performance obtained after the fixed-point conversion.From: Accuracy Constraint Determination in Fixed-Point System Design
Iteration | Noise level | Measured performances |
|---|---|---|
| Â |
|
|
0 | −99.35 | −1.2 |
1 | −105.35 | −0.77 |
2 | −102,2 | −0.86 |
3 | −101 | −0.97 |
4 | −100,85 | −0.98 |
5 | −100,7 | −0.99 |
(dB)
(ODG)